MuxLab 500730 6G-SDI Extender over UTP

$1,732.95
SKU: 500730
Availability: In Stock

This MuxLab 500730 6G-SDI Extender over UTP is a unique solution from Muxlab for extending SDI based cameras or other SDI sources up to 4K resolution with the added benefit of extending the Hi Resolution signal up to 330ft (100m).

Standard Cat5e/6 UTP cable is used for the extension. The 6G-SDI Extender supports PoE, whereby the Transmitter may be powered by the Receiver. The product allows for versatile combinations of sources, including one 6G‑SDI source, two 3G-SDI sources or four HD-SDI sources.

MuxLab 500730 6G-SDI Extender over UTP

  • Up to 330ft (100m) at full resolution
  • Supports one 6G-SDI source, two 3G-SDI sources, or four HD-SDI sources
  • Up to 4K @ 30Hz resolution
  • Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M
  • Supports all 6G channel configurations (1/2/4)
  • Automatic SDI Link recognition and configuration
  • Automatic activation of long reach mode 500ft (150m) when a 3G signal is detected
  • USB interface for field upgradeable firmware and diagnostics
  • PoE powered, power Transmitter from Receiver
  • Ethercon Connectivity and Aluminum Enclosure for ruggedized use

MuxLab 500730 6G-SDI Extender over UTP Specification

  • Environment : 6G-SDI digital signal transmission
  • Enclosure Type & Dimensions : Black Metal, Dim: 5.6" x 4" x 1" (14.2 x 10.1 x 2.54cm) (RX) / 4.3" x 4.3" x 1" (10.9 x 10.9 x 2.54cm) (TX)
  • Control : Serial console emulation with USB interface
  • Front panel (RX) : Mini USB for firmware updates status LEDS
  • Rear panel (RX)
    • +48 V power jack
    • BNC for SYNC input signal
    • RJ45 for UTP cable between RX and TX unit
    • 4x BNC connectors for SDI output
  • Front panel (TX)
    • BNC for SYNC output signal
    • 4x BNC connectors for SDI output
  • Rear panel (TX) : RJ45 for UTP cable between RX and TX unit
  • Top panel (TX) : Mini USB for firmware updates status LEDS
  • Connectors (SDI in) : 4 BNC connectors for SDI input (0.8V pp, 75 ohm)
  • Connectors (SDI out) : 4 BNC connectors for SDI output (0.8V pp, 75 ohm)
  • Connectors (sync) : 2 BNC connectors
  • Connectors (control) : Mini USB, for configuration and firmware updates
  • Connectors (UTP ) : RJ45 / Ethercon, for UTP communication
  • Connectors - power : One standard 2.1mm power jack
  • Compliance : FCC, CE, RoHS
  • Power : 48V external power supply with US, UK and Euro blades

Datasheet: 6G-SDI Datasheet

Why not buy this MuxLab 500730 6G-SDI Extender over UTP today?